Liftoff Template โ Complete Guide
Liftoff turns your invitation into a launch day. Guests open it to a night sky over a launch pad: a rocket stands by its tower with your cover photo in its round window, the same photo hangs big on a mission poster beside it, and a T-minus readout counts down to your event. One tap on Launch lights the engine, smoke rolls off the pad and the rocket clears the tower, then it lands back for the next guest. Down the page, every section is a planet on the way up.
Liftoff is one of Fotify's simpler designs: its look comes from one rocket colour you choose, a sky and a tone.
This guide covers how Liftoff looks, the options unique to it, how to apply it to your event, and how it lays out each section of your invitation.
Liftoff is available on every plan, Free included.
For an overview of the template gallery and the picker, see How to Customize Your RSVP Invitation.
What makes Liftoff different
Standard templates change colours and fonts over the same shared layout. Liftoff replaces the layout itself: its own cover and closing, its own section heads, and its own treatment of the message, countdown, gallery, story, programme and reply.
Signature design elements
- A launch site as the cover โ stars, a ringed planet at the edge of the sky, a launch tower and a rocket on the pad, all drawn by Fotify
- Your photo twice โ small in the rocket's round window, and big on a mission poster beside it, so it is always easy to see
- The Launch button โ the one moment guests set off themselves: the engine lights, smoke rolls off the pad and the rocket lifts out of the frame, then lands back on the pad a few seconds later. Tapping the rocket does the same
- A T-minus readout โ the days, hours and minutes to your event beside the pad, when your countdown is on
- A trip past the planets โ each section opens with a small drawn planet, the countdown is a launch-control board, the gallery a crew photo wall, the story a mission log and the programme a mission timeline
- One colour, three skies, two tones โ pick the rocket colour, a sky (deep space, before sunrise or cartoon blue) and a tone (rounded and playful for kids, or clean and minimal for a launch)
- Always readable โ whatever colour you pick, even a near-black, the buttons, the countdown digits and the words on them are adjusted until they read clearly on the night sky
- Its own rocket โ no real rocket, space agency or mission is copied: no logos, flags or markings
When to choose Liftoff
Liftoff suits any event with a countdown to a big moment:
- Kids' birthdays โ a space party with chunky cartoon planets and the birthday child in the rocket's window
- Product launches and company events โ the clean Launch tone, a minimal sky and a T-minus readout to the reveal
- Graduations โ a send-off for the next mission, with the class photo on the poster
- Gender reveals and New Year countdowns โ the countdown board ticking down to the moment
- Science fairs and school events โ a flight plan for the day and a crew wall for the photos
Whatever the occasion, the photos your guests take matter as much as the invitation. Guests can scan the event QR code and add their photos to the shared gallery. See how Fotify works for birthdays, parties and corporate events.
For a party full of balloons, try Balloon. For a conference-style launch, try Keynote. For a graduation, try Diploma.
Applying Liftoff to your event
- Open your event, click Invitation in the sidebar, then the Invitation tab
- In Design Template, click Change template if the gallery is collapsed, and find Liftoff under Designs (it is listed under the Birthday filter, and under Corporate, Party and Graduation too)
- Optional: press Try it on to see Liftoff with your own invitation details in the live preview โ nothing is saved until you press Use this design
- Or click the Liftoff card to apply it straight away
- Open Liftoff options below the gallery to pick your colour and the other options described below. Changes save automatically
Liftoff works on every plan. On free events a small "Made with Fotify" badge appears in the bottom corner of the invitation; any paid plan or an active subscription removes it.
Switching to another template later is non-destructive: your event content stays exactly as you entered it, and your Liftoff options are kept in case you switch back.
Liftoff options
Liftoff has five options of its own. They take the place of the standard colour and font controls, which Liftoff doesn't use.
1. Rocket colour
The colour of your rocket's stripe, nose and fins. Pick it two ways:
- A suggested swatch โ Coral (default), Mint, Sun or Violet
- Pick any color โ the last chip opens your device's colour picker, so you can match a brand, a school or a party colour exactly. The colour's code is shown beside the chips
Liftoff also uses it for the I'm on board buttons, the countdown digits, the mission patch on the RSVP, the planets' rings and the flight path. The words on a button turn black or white, whichever reads better. Any colour works: a very dark one is lifted until it shows clearly on the night sky.
2. Sky
- Deep space (default) โ navy and starlight
- Before sunrise โ the violet hour before dawn, with a warm glow on the horizon behind the pad
- Cartoon blue โ a bright, playful blue
3. Tone
- Kids (default) โ rounded, friendly type, chunky cartoon planets and twinkling stars
- Launch โ clean type, labels in a mission-control mono, and a minimal sky with the planets drawn in fine lines
4. Cover line
The small line at the top of the cover, over the mission name (up to 80 characters). Leave it blank to use the default ("You're invited aboard").
5. Closing line
The line under Mission complete at the end of the page (up to 80 characters). Leave it blank to use the default ("See you at the launch pad!").
Every piece of text Liftoff prints on the invitation โ the cover line, the Mission label, Ready for launch, the Launch and I'm on board buttons, the section labels and titles, the countdown units, Mission complete โ can also be rewritten directly on the page: switch the live preview into edit mode and double-click the text. Section titles you have already set in their own settings (story, countdown, gifts, where to stay, getting there, FAQs) are edited in place the same way.
How each section is treated
Cover
Liftoff's cover replaces the standard header with a launch site under the night sky:
- The cover line (option 4) at the top, then the word Mission over your event name, exactly as you entered it. Long names step down a size so they never break mid-word
- The mission poster โ your cover photo, big, in a frame edged in your rocket colour. A portrait photo gets a portrait frame, so nobody loses their head, and the framing you set for your cover photo is kept, on the poster and in the rocket's window alike
- The launch site โ the tower, the pad, a ringed planet at the edge of the sky and the rocket, with your photo small in its round window. Without a cover photo the poster is left out and the window shows glass
- The T-minus readout โ the days, hours and minutes to your event in the venue's time zone. It shows only when the cover shows your date and your countdown is switched on; otherwise it reads Ready for launch
- The Launch button โ lights the engine and sends the rocket up and back. Tapping the rocket does the same
- The date, the time and the place, following the Show date, Show time and Show location settings of your invitation's cover. Every guest sees the date you picked, whatever their time zone
- I'm on board, which scrolls to the RSVP form. It only appears when your RSVP section is visible, and never on a save-the-date page
If your cover image is a finished invitation you designed elsewhere, it is shown whole at the top instead, with the I'm on board button under it.
Section heads
Each section opens with a small drawn planet beside its label and its title โ with your subtitle under the story's title.
Message โ an incoming transmission
Your message on a card with a little signal strip along its top. A short message (up to about 160 characters) is set larger.
Countdown โ the T-minus board
A dark launch-control board with T-minus over the days, hours and minutes (and seconds, if you show them) as lit digits in your rocket colour, with colons between them. It counts down to your event's date and time in the venue's time zone, and shows your completed message once the moment arrives.
Gallery (Carousel) โ the crew photo wall
Your photos as square crew badges, each with a ring in your rocket colour and a small star at its corner, two to a row on a phone and three on a computer. Every photo is shown.
Story โ the mission log
The milestones down a dotted flight path, each with a planet marker: its date, its title, its text and its photo, exactly as you entered them.
Itinerary โ the mission timeline
Each day opens with its date or label (only when the day has one), then each entry down a flight line: its time on a small mission clock, the title, the place beside a pin and any note. The clock shows the time you entered; an entry without a time has no clock. Entry icons are not shown.
RSVP โ the mission patch
"Join the crew" with your RSVP deadline under it, and the reply form in a card sewn into a mission patch: a round badge in your rocket colour over its top edge, a stitched inner line and a Crew sign-up band. On a save-the-date page the card holds the save-the-date note instead of the form.
Location, Gifts, Event Details and Save the Date
These four sections share their structure with Fotify's other picker-coloured designs (Meridian, Thread, Prism and Duotone), dressed in Liftoff's night sky: dark cards, labels in your colour and round buttons in your rocket colour.
- Location โ a map card beside an address card with your address, your directions and an Open in Maps button. When a map can't be shown, the map card draws a pin with the venue's coordinates; without coordinates the address card spans the row
- Gifts โ every registry, payment option, charity and wishlist item is its own card in a grid, grouped under small labels (with a count) when you offer more than one kind. Payment details sit in an inset box with a Copy button. Pay links, scan-to-pay QR codes and wishlist reservations appear as buttons on each card
- Event Details โ a card per topic: dress code with your suggested and avoided colours as swatches, where to stay with each hotel as a mini-card, getting there with an icon for each kind of transport, and a full-width FAQ card where each question opens on tap
- Save the Date (Calendar) โ one card with the title and the event date, and Google, Apple (downloads the calendar file) and Outlook buttons
Closing โ mission complete
A small planet with the rocket landed on it and a flag, Mission complete, your closing line (option 5) and the I'm on board button once more.
Sections that use the shared layout
These sections keep Fotify's shared layout and are dressed in Liftoff's style:
- Photo upload, QR code, Table assignment, Playlist, Sub-events, Special treatments and custom sections
Each sits in the same column as the rest of the page on a dark card, with titles in Liftoff's type and buttons in your rocket colour.
Frequently Asked Questions
Q: What happens when a guest presses Launch? A: The engine lights, smoke rolls off the pad and the rocket lifts out of the frame. A few seconds later it lands back on the pad, ready for the next launch. It plays on the guest's screen only; nothing is sent or saved.
Q: Where does the T-minus readout count to? A: To your event's date and time, in the venue's time zone. It appears when your countdown is switched on and the date is shown on your cover; otherwise the readout says Ready for launch.
Q: Does the mission timeline make up times? A: No. Each entry's clock shows the time you entered for it. Liftoff never works out offsets or step numbers, and an entry without a time has no clock.
Q: Can I use my brand or school colour? A: Yes. Set the Rocket colour with Pick any color. The rocket, buttons, countdown digits and the mission patch take your colour, and the words on them stay readable.
Q: Does Liftoff work in right-to-left languages? A: Yes. In Hebrew and Arabic the page mirrors: the tower moves to the other side of the rocket and the planets sit on the right of each section's title. The countdown and the clocks keep their left-to-right order, and your cover photo's framing stays as you set it.
Q: Does the page move? A: The cover steps in once as the page opens and the stars twinkle in the Kids tone; the rocket only flies when a guest presses Launch. Guests whose device asks for reduced motion, and invitations whose Motion setting is calmer, see the rocket waiting on the pad with its engine glowing, and no Launch button.
Next steps
- See How to Customize Your RSVP Invitation for the template gallery and how to try a design on before applying it
- Compare other playful designs: Balloon, Big Top or Arcade
- Let guests share their photos with a QR code: read about Fotify for birthdays and digital invitations with RSVP
Need help? Get in touch through the in-dashboard help widget.
Was this article helpful?